Product Details:
Minimum Order Quantity | 1 Piece |
Size | 1-5 inch |
Material Standard | ASTM A182 |
Usage/Application | industrial gas industry |
Type | WNRF , SORF , BLRF |
Shape | AS PAR ORDER |
Color | STAINLESS STEEL |
Surface Finish | BRIGHT |
Country of Origin | Made in India |
We are best offerOrifice Flanges are used with orifice meters for the purpose of measuring the flow rate of either liquids or gases in the respective pipeline. Orifice flanges generally come with either raised faces or RTJ (Ring Type Joint) facings. They are, for all intensive purposes, the same as weld neck and slip-on flanges with extra machining. They have modifications of radial tapped holes in the flange ring for meter connections and orifice plate carriers for the reason of fitting meter connections. The additional bolts act as a jack to allow the separation of the two flanges to change the orifice plate or for other inspection services. Skyland Metal And AlloysInc. offers these flanges in stainless steel material. For carbon steel, We not only stock certain sizes of this flange, but has been a reputable source for them for over thirty years. We usually supply the plate, pressure connection holes, and jack screws with the orifice flange unit (which is usually two flanges mated together and ready for use) Please contact our sales department with additional questions on orifice flanges.
Key Features:
Orifice Flanges are used with orifice meters for the purpose of measuring the flow rate of either liquids or gases in the respective pipeline. Pairs of pressure "Tappings", mostly on 2 sides, directly opposite each other, are machined into the orifice flange. This makes separate orifice carriers or tappings in the pipe wall unnecessary.
Orifice Flanges generally come with either Raised Faces or RTJ (Ring Type Joint) facings. They are, for all intensive purposes, the same as weld neck and slip on flanges with extra machining.
The image on the right shows a set Orifice Flanges, where a Orifice Plate is mounted and a jack screw is machined. This jack screw is used to facilitate separating the flanges for inspection or replacement of the Orifice Plate and gaskets.
The range of orifice flanges covers all standard sizes and ranges, and all common flange materials. Flanges are available in Welding Neck, Slip On, and Threaded form, and are typically supplied with two 1/2" NPT tappings in each flange.
ASME B16.36 covers Dimensions and dimensional tolerances from orifice flanges (similar to those covered in ASME B16.5) that have orifice pressure differential connections. Coverage is limited to the following flanges:
Additional Information:
Product Details:
Material Standard | ASTM A182 |
Usage/Application | Industrial |
Rated Pressure | 150-900 Bar |
Surface Finish | Polished |
Temperature | -30~+350 Degree C |
Material | Stainless Steel |
Stainless Steel | ASTM / ASME SA 182 F 304 , 304L, 304H, 309H, 310H, 316, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347 |
Range | 15 NB UP TO 600 NB IN 150 LBS , 300 LBS, 400 LBS , 600 LBS , 900 LBS |
Technique | Hot Rolled |
Product Details:
Minimum Order Quantity | 2 Piece |
Material Standard | ASTM A182 |
Usage/Application | Industrial |
Shape | Round |
Material Grade | SS316 / SS 304 |
Size | 1-5 inch, 0-1 inch, 5-10 inch, 10-20 inch |
Color | Black |
Material | Stainless Steel |
Product Details:
Minimum Order Quantity | 50 Piece |
Material Standard | ASTM A182 |
Usage/Application | Industrial |
Size | 5-10 inch, 1-5 inch, >30 inch, 10-20 inch, 0-1 inch, 20-30 inch |
Surface Finish | Polished |
Material Grade | SS316 |
Technique | Hot Rolled |
Material | Stainless Steel |
Product Details:
Grades | Monel 400, Monel k500 |
Temperature Range | -50 To 150 Degree C |
Range | 1/2" NB to 60" NB |
Size | 1 Inch - Greater Than 30 Inch |
Surface Treatment | Powder Coated |
We got beneficial in showing fine quality scope of Monel Flanges. Monel Flanges are given in different stipulations according to the expressed needs of clients. Monel Flanges are investigated by quality office for guarantee its disfigurement. Besides, our regarded customers adulated these monel flanges due to its qualities say beneath.
Product Details:
Usage/Application | Industrial |
Size | 0-1 inch, 1/2, 1-5 inch, 5-10 inch |
Material Standard | ANSI B16.5, ASTM,ASME,API,AISI,BS,ANSI,DIN,JIS,MSSP,NACE, ASTM A182 |
Temperature | 0-60 Degree C |
Technique | Hot Rolled |
Pressure Class | 150/300 Lbs |
Grades | Hastelloy C-22, Hastelloy C-276, Hastelloy C-2000 |
Product Details:
Surface Finish | Polished |
Range | 15 Nb Up To 600 Nb In 150 Lbs,300 Lbs,400 Lbs,600 Lbs,900 Lbs,1500 Lbs |
Technique | Hot Rolled |
Material Standard | ASTM A105, ASTM A351, ANSI B16.5, ASTM A182 |
Product Details:
Material | Nickel |
Range | 15 NB UP TO 600 NB IN 150 LBS , 300 LBS, 400 LBS , 600 LBS , 900 LBS , 1500 LBS |
Surface Treatment | Powder Coated |
Rated Pressure | 1.6 Bar |
Features:
Product Details:
Usage/Application | Industrial |
Size | 0-1 inch, 1-5 inch, 5-10 inch, 1/2 inch - 48 inch (15mm - 1200mm) |
Material Standard | ASTM A105, ASTM A182 |
Tensile Strength | 655 MPa |
Temperature | -50 To 150 Degree C |
Elongation | 35 % |
Surface Treatment | Powder Coated |
Grades | Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686 |
Standard | ANSI/ASME B16.5, ANSI B16.47 API, DIN, JIS, BS |
Product Details:
Material | Titanium |
Density | 4.51 G/cm3 |
Surface Treatment | Powder Coated |
Standards | DIN, ASTM, BS |
Tensile Strength | 35 MPa |
Elongation | 24% |
Product Details:
Class | 150 to 3000 |
Flanges Grade | ASTM A 182 F 304/L; 316/L; 317/L; 309; 310; 321; 347; 904L. |
Working Temperature | 0 To 120 Deg Celsius |
Grades | Incoloy 800, incoloy 825, Incoloy 925, Incoloy a-286, Incoloy DS |
Product Details:
Minimum Order Quantity | 5 Kilogram |
Shape | patta paatti flate |
Finish Type | brass |
Material Grade | BRASS |
Material | Brass |
Surface Finish | Polished |
Thickness | 0.2 mm To 90 mm |
Length | 10-12 Feet |
Additional Information:
Additional Information: